All data is for information only------(Home)
PRODUCT DATA of AISI 430
MaterialAISI 430
Product DatasheetCarpenter 430
AK steel 430_Data_Sheet
General InformationFerritic stainless steel
Chemical CompositionFe-17Cr-0.15C
EXPERIENCE IN PRACTICE
Equivalent Designations1.4742'; X10CrAl18; 430 S15; Z10CAS18; X8Cr17
PHYSICAL PROPERTIES
Crystal StructureFace centered cubic (fcc)
Specific Gravity7.78
Magnetic PropertiesFerromagnetic
ELECTRICAL PROPERTIES
Electrical Volume Resistivity6e-7 ohm.m
THERMAL PROPERTIES
Thermal Conductivity26.1 W/m.K
Thermal Expansion Coefficient10.4 μstrain/°C
Specific Heat0.46 J/g.K
Melting Range1430 to 1510 °C
RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY
General Corrosion StatusNo specific corrosion protection required
Stress Corrosion StatusHigh Resistance to SCC: Table 1
Remark: Tempering between 371C and 593C shall be avoided because corrosion and stress corrosion cracking resistance is lowered.
Data Quality: Design Data
Bimetallic CorrosionCan be connected without any restriction to: Cr, Au, Ag, Gun-metal, P-bronzes, Sn-bronzes, Ti+alloys, Ni, Monel, Inconel, Ni/Mo alloys
Can be connected in a non-controlled environment to the above and Cd, austenitic cast iron, Cu, Brasses, Al-bronzes, Si-bronzes, Au, Pt, C, Rh, Sn-Pb alloys, Sn, Pb, 300 series stainless steels
Can be connected in a clean room environment to above and Al-Cu alloys
Needs specific measures: All others
Test:ECSS-Q-ST-70C Rev.1 Table 5.1
Data Quality: Design Data